Dear Respected Customers,
As the Tier One suppliers of YUTONG bus, NEWBASE products are also widely needed in after market of YUTONG bus and the Air Conditioner system. But we found some imitated control panel in name of NEWBASE in after market and service station.
NEWBASE would protect our products and patents with legal way against the unlawful acts of patent infringement and counterfeiting registered trademarks.
For sake of your consumer rights and interests, guaranteeing your brought products quality and having you far away from the counterfeit and shoddy products, pls refer to the comparison of NEWBASE control panel and fake NEWBASE control panel as following.
| Appearance comparison |
| Category |
Item |
Fake(mm) |
NEWBASE(mm) |
Remarks |
| Front cover |
Mounting dimension at retaining clips |
158.9 |
159.1 |
One same PCB is not easy to pick&place in NEWBASE body shell, but loose in fake product. |
| Overall width |
57.82 |
58.08 |
| Inner dimension |
54.14*142.4 |
53.5*141.66 |
| Thickness (including catch) |
1.96（2.48） |
2.3（3.04） |
| 1.8（2.5） |
2.36（3.14） |
| Qty of block pieces |
6 |
8 |
| Height of screw bolt |
9.3,9.56 |
9.7,9.8 |
|
| Width of retaining clips |
23.92 |
23.02 |
|
| Back cover |
Height of screw bolt |
5 |
6 |
|
| Hole size for connector |
18.3*56.2 |
19*56.1 |
Refer to Attachment 5 |
| Connector height |
30.3 |
30.66 |
|
| Key dimension |
2.4*2.42 |
2.38*2.4 |
One same key cap is suitable for NEWBASE keys, but loose for fake products. |
| Key cap height |
8.04 |
8.06 |
|
| NEWBASE logo |
Logo font and R size are incongruent |
Refer to Attachment 2,3 |
| Certification |
Font and mark are incongruent |
Refer to Attachment 1 |
| Ventilation grid |
shape |
Refer to Attachment 4 |
| Guarantee lable |
Font, color and logo are incongruent |
Refer to Attachment 6 |
| Outside surface |
Radiance is incongruent. |
Refer to Attachment 7 |
| PET cover |
Material |
PVC |
PET |
Refer to Attachment 8 |
| Wire harness |
Single wire |
With letter on the wire |
Wire diameter 0.75mm |
Refer to Attachment 9,10 |
| Controller comparison of inner electric components |
| Category |
Component location |
Fake |
NEWBASE |
| Front PCB |
R3 |
SMD 5101 |
SMD 512 |
| R4 |
SMD 5101 |
SMD 512 |
| R5 |
SMD 5101 |
SMD 512 |
| R6 |
SMD 1001 |
SMD 102 |
| R7 |
SMD 1001 |
SMD 102 |
| R8 |
SMD 2002 |
SMD 203 |
| R9 |
SMD 2001 |
SMD 202 |
| R10 |
SMD 1001 |
SMD 102 |
| R11 |
SMD 1002 |
SMD 103 |
| R12 |
SMD 1002 |
SMD 103 |
| L1 |
22 pins |
23 pins |
| Back PCB |
C1 |
Plug-in unit 63V/330UF |
Plug-in unit 50V/220UF |
| C3 |
Plug-in unit 50V/220UF |
Plug-in unit 63V/330UF |
| R2 |
SMD 5101 |
SMD 103 |
| R3 |
SMD 2002 |
SMD 203 |
| R4 |
SMD 5101 |
SMD 512 |
| R5 |
SMD 5101 |
SMD 512 |
| R7 |
SMD 5101 |
SMD 103 |
| R8 |
SMD 5101 |
SMD 103 |
| R9 |
SMD 5101 |
SMD 103 |
| R10 |
SMD 5101 |
SMD 512 |
| R11 |
SMD 5101 |
SMD 103 |
| R12 |
SMD 5101 |
SMD 103 |
| D3,D4,D5,D6,D7,D8 |
SMD M7 |
SMD M4 |
| D10,D12,D13,D14,D15 |
SMD M7 |
SMD M4 |
Remark: Most of the electron component of fake controller are inferior, the performance parameter is far below than the design requirements, with poor reliability and short lifetime.
Attachment 1. Certification
|
Fake
|
NEWBASE
|
|
Old model
|
New model
|
|
.jpg)
|
.jpg)
|
.jpg)
|
Attachment 2. Logo font
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
Logo font in narrow
|
Logo font in bold
|
Attachment 3. R size
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
Small R trademark and not clear
|
Well-marked R
|
Attachment 4.Ventilation grid shape
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
rectangle
|
With gradient and cambered buttom
|
Attachment 5.Connector hole shape
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
Without groove and with ragged edges
|
With groove and neat edges
|
Attachment 6. Guarantee lable
|
Fake
|
NEWBASE
|
|
Old model
|
New model
|
|
.jpg)
|
.jpg)
|
Cancle the guarantee lable
|
Attachment 7. Outside surface radiance
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
Attachment 8.Face cover material
|
Fake
|
NEWBASE
|
.jpg)
.jpg)
|
.jpg)
.jpg)
|
|
Uncover it, the hyaline layer and the bondline layer are separated, the black mass is pasted on the controller body, what’s more, the poisonous PVC material is forbidden with poor quality, also it’s easy to crack and break.
|
NEWBASE PET cover use imported glue with high viscosity, it’s wearproof, ultraviolet-proof and with good thermal endurance for high&low temperature. It is not layered when uncovering, and it’s clean on the body shell.
|
Attachment 9.Wire appearance
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
Non flame-retardant wire with GB standard,wire diameter is 2.4mm with coating, This kind of wire is not accepted by YUTONG bus, as it’s easy heating, poor transmission signal and not stable.
|
Antiflaming wire with DIN standard, wire diameter is 0.75mm, diameter 2mm with coating, without any letter on the wire.
|
Attachment 10.Pins in the connector
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
Brass terminal, poor elasticity, easy to cause poor contact so that bring instability for controller working.
|
Tinned copper terminal in silver color with good elasticity, reliable for plug contact.
|
Attachment 11.Keys
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
A hole on the key top
|
Smooth top
|
Attachment 12.LED Display pins
|
Fake
|
NEWBASE
|
.jpg)
|
.jpg)
|
|
22pins,a hole on PCB is idle
|
23 pins
|
What’s more, there is great defect in the control program of fake controller, lead to hidden troubles such as crash, non-starting up, instability output and so on.
Pls pay attention to above comparison information sincerely, we would also do you a favor for a judgement warmly.
If you find fake NEWBASE controller on the market or somewhere, welcome to report to us with clue and evidence, we would be much appreciated.
For the people marketing the fake products what violate our patent right and trademark right, we hope you could stop asap, to avoid give rise to bad effects for your customers and unnecessary lawsuit.
.png)
